6S Shaking Table

6S Shaking Table

Shanghai Zenith production 6S shaking table is one of the main equipment of gravity concentration, it is widely used in the beneficiation of tungsten, tin, tantalum niobium and other rare metals and precious metal ore. It can also be used to separate iron, manganese ore and coal. When dealing with tungsten, tin ore, the table effective recycling granularity scope is 2-0.02 mm.
the historical development of 6S shaking table: I plant the production of shaking table has a long history, and the development of innovation, from the initial straight strip surface of bed table is based on the development to the single wave shaking table bed (70's of last century); to double Qu Bo shaking table bed (90's of last century), so that the processing capacity, the table the recovery and enrichment ratio have greatly improved.

6S Shaking Table using range

Shaking table is used for gravity ore dressing equipment beneficiation of fine material is one of the widely used for selection of shake, tungsten, tin, tantalum, niobium and other rare metals and precious metal ore, also can be used for separating iron, manganese ores, and coal etc..

6S Shaking Table advantages

Table with enrichment ratio in gravity separation, separation efficiency high, safeguards easily, convenient adjustment, the advantages of a draw the final and final tailings. Table because of its wide material particle size, high separating efficiency, the working state of intuitive, easy operation management in gravity separation process accounted for a large proportion of the.

Ore dressing process 6S Shaking Table

Ore dressing process of shaking table is in bed with inclined complex strip surface, mineral particle swarm from the bed surface angle feed chute into, at the same time to sink by lateral flushing water supply, so the mineral particles in gravity, transverse flow momentum, bed reciprocating asymmetric motion generated by the inertia and friction force under the effect of proportion and granularity hierarchical, and along the bed surface longitudinal motion and transverse motion along the inclined surface of bed. Therefore, the different proportion and granularity of mineral grains along the movement direction of respective gradually from A side to B side fan flow, different area from the concentrate and tailings discharge end side, finally is divided into concentrate, middlings and tailings.

Technical data

6S Shaking Table
Model and Specification 6-S/LY 6-S/LY 6-S/LY LY
Table Size(mm) Length×Feed width×Concentrate width 4520×1850×1560 3000×1620×1100 2100×1050×850 1100×500×430
Selective are(㎡) 7.67 4.08 2 0.51
Feed size(mm) coarse sand 1-2.5 0.6-1.5 0.4-0.8 0.1-0.2
fine sand 0.8-1.2 0.3-0.8 0.2-0.5 0.05-0.1
slurry 0.3-0.6 0.2-0.4 0.1-0.2 0.03-0.05
Water consumption(t/h) 0.5~3.5 0.3~1.5 0.2~1 0.1~0.5
Stroke(mm) 8~36 10~30 12~28 9~17
Jig frequency(q/m) 240~380 240~420 250~450 280~460
Cross fall(°) 0°~5° 0°~8° 0°~10° 0°~10°
Motor Model Y70L-4 Y100L-4 Y90L-4 Y80L-4
Power(kw) 1.1 1.1 1.1 0.55
Revolving speed(r/min) 1400 1400 1400 1400
V-belt(mm) A-2000 A-1033 B-2007 A-1245
Overall Dimension(Length*Width*Height)mm 5630×1850×900 4075×1320×780 3040×1050×1020 1530×500×800
Weight(kg) 650 550 350 150
Notes: The above technical parameters based on stationary type shaking table, are for your reference only.